In my previous article, I explained about long exposure photography, the technique involved and the important features and materials you require while shooting photos in slow shutter. In this article, I’ll show how you can take long exposed photos. In this simple tutorial, you’ll learn how to create the following effect – Writing your own name
Flashlight or LED
You can use any kind of light source, but make sure that you can control the light. For best results, stick to a flashlight or an LED.
Setting Up Things
First things first. Get your camera and set it on your tripod or on a flat surface (make sure it does not shake). Set the focus of your camera using the auto-focus mode or AF mode. Once the camera is focused, switch it to manual mode and do the following changes:
Set your camera ISO to 100 or 200. Always use lower ISO when doing long exposure photography. It reduces the noise.
Since we’re writing a name, we require ample amount of time. Therefore, we need to keep the camera shutter open for a longer period. I took about 20 seconds to write my name. I suggest you to set the shutter speed to at least 30 seconds.
Aperture completely depends on your lens/zoom, focal, exposure etc. I generally use f/11. Depending on the conditions, figure out what aperture suits best and set the aperture.
Once you’ve changed the above mentioned settings, you’re now ready to go.
Turn off the lights and press the shutter-release button. The camera shutter is now open. Without shaking the camera, slowly go and stand in front of it. Turn on the flashlight and start writing your name in mirror image (or you can draw/scribble something). The shutter will close after 30 seconds, so you need to be as quick as possible.
You may commit a few mistakes, but repeating the steps several times will definitely give you a result.
Now you can start experimenting with different colored flashlights to get some nicely exposed pictures. Use your art and make it look colorful! Here’s something you can try as well. Turn yourself into a ghost!
P.S. You need to remotely trigger the shutter-release button to do this, so you will need a wireless remote.